It very well may be extremely disappointing to painstakingly paint new or old racks, just to find that all that you put on them sticks. Far and away more terrible, in some cases you will track down that the paint strips off when you get a thing put away on the rack. This doesn’t involve the paint just not being completely dry—it in some cases keeps on happening a long time after the paint has dried. Here are a few ideas for painting (or repainting) carport racking, shelves, kitchen cupboards/racks, or washroom cupboards that ought to altogether decrease those persistent issues.
- Clean the Shelves
- Use an Alkyd (Oil-Based) Paint
- Try a Waterborne Acrylic Enamel
- Top-Coat With Polyurethane
- Apply Paste Wax
Clean the Shelves
If you are experiencing sticking problems with shelves that were painted some time ago, they may need to be cleaned. This is especially true with kitchen cabinet shelves. Give them a good scrubbing with a grease-cutting household cleaner or dish soap with a non-scuffing scrubber and see if that reduces the problem.
If shelves were not thoroughly cleaned before repainting, contaminants might be seeping through the paint and causing the sticking problem. In this case, the best solution may be to re-sand, re-clean, and re-paint the shelves with a good quality alkyd or acrylic paint.
Use an Alkyd (Oil-Based) Paint
Alkyd (oil-based) paints provide a tougher finish than latex (water-based). They are getting harder to find due to environmental restrictions and improved latex-paint quality. Still, many professional painters rely on alkyd paint for shelves and cabinets.
Note that alkyd paints require mineral spirits for clean up (versus water for latex). They also take longer to dry. Avoid putting anything on an alkyd-coated shelf for at least a week. Alkyd paints also tend to yellow over time.
Try a Waterborne Acrylic Enamel
As an alternative to alkyd paint, waterborne acrylic enamel is more readily available to consumers, with an added expense. It’s low odor, sandable, requires less drying time, and has yellow-blocking capabilities. Depending on the type of finish you’re looking for, you may have to do a bit of searching. Some companies only offer semigloss or high-gloss, while others offer satin, matte, and flat.
Top-Coat With Polyurethane
Apply two coats of water-based polyurethane over the shelves. Water-based polyurethane can be used with both latex and alkyd painted surfaces and will not alter the color (unlike oil-based polyurethanes, which add a yellowish tint). Clean the shelves well before application, and let the polyurethane dry for several days before putting the shelves back in service.
Apply Paste Wax
This is a simple solution that can be very effective. Clean the shelves, then apply some paste wax with a soft cloth. Let the wax dry to a haze (about 15 minutes), then buff it with a clean, soft cloth. Add a second coating of paste wax, and plan to re-wax the shelves every year or so.