Have you at any point purchased something new however wished it looked collectible? You can’t accepting person, yet you can counterfeit it with an antique paint finish. It is very simple to antique a piece of more up to date wood furniture and make it look upset by utilizing paint and color.
The secret to making wood look practically endured is to not try too hard. The completion will not look normal on the off chance that you endeavor to make an excessively troubled look. Our model focuses on a bothered wood get done with an unobtrusive appeal. The composition method portrayed here can be applied to wood, overlay, or any furniture you need to look matured.
Equipment / Tools
- Sanding blocks, 150-grit and 220-grit
- Power sander (optional)
- Painter’s tape
- Clean rag
- Wood stain or brown paint
- Matte paint, chalk paint, or milk paint
- Prepare the Furniture
- Sand the Existing Finish
- Color the Bare Wood
- Apply the Main Color
- Apply a Second Coat
- Sand and Buff
- Add Finishing Touches
Prepare the Furniture
First, remove all hardware and mask off any areas that you don’t want to paint, using painter’s tape. Carefully clean the item of any dust or grime. Make sure that the furniture is completely dry before you go onto the next step.
Sand the Existing Finish
Lightly sand the entire surface using a 150-grit sanding block. Sand just enough to remove any sheen, which will help the paint stick.
Next, use the sanding block completely remove the existing painted finish or stain in areas that would be prone to heavier wear, like the edges and high points. The goal is to get down to the raw surface of the wood so that the coloring agent can penetrate. If desired, you can use a power sander to make the process a bit faster.
If your furniture piece has multiple layers of caked-on paint that you don’t want to show through, you can opt to strip the entire piece down to the bare wood. You can do this work yourself, or have the piece “dipped and stripped” by a professional, who will submerge it in a vat of solvent to remove the paint.
Color the Bare Wood
Once the preliminary sanding is complete, apply wood stain or dark paint as a coloring agent to low spots and areas where wood has been exposed. Our project used walnut oil, but you can use any type of wood stain or dark paint for similar results. If you are using dark paint, thin it down a bit with some water. The best way to apply the coloring agent is with a clean rag. Wipe away any excess.
Don’t worry if the coloring overlaps onto surrounding paint. The next layer of paint will cover this.
Apply the Main Color
Next, coat the entire piece of furniture with a thin layer of your selected paint. The thinner the layer, the easier the next steps will be. We opted to use a matte-finish paint, which works well when you don’t want to use a primer. Chalk paint or milk paint provides a similar sheen, but it may need to be sealed with a wax finish.
If you are applying latex paint over a varnished finish, or one previously painted with oil-based paint, a thin layer of paint primer applied before painting will help the latex paint adhere.
Remember, the lighter the hand, the better this antiquing will turn out. Thick coats of paint will make it harder to sand and achieve the look you seek. Let the first coat dry for 24 hours before proceeding to the next step.
Apply a Second Coat
Applying a second coat of paint will ensure that all the excess coloring has been thoroughly covered and isn’t bleeding through, making your end result look more natural. Also, if you are working with a piece of unpainted wood furniture, you may opt to use a different color for your second coat, so that more layers show through when you distress the wood.
The second coat should also be applied in a thin layer. Allow it to dry completely before proceeding.
Sand and Buff
This next step is where the magic happens. Using a 150-grit sanding block, buff down the edges so that the dark areas start to peek through. Start slow and take a step back every so often to evaluate the distressed look. Avoid the temptation to sand excessively.
Next, take a 220-grit sanding block and lightly sand to remove a little more of the top layer of paint near the edges. This step is going to reveal the original finish, which in this example is white paint.
Finally, soak a rag in coloring agent and buff it into the edges. Immediately wipe away any excess. To make the finish look even more aged and rustic, you can lightly buff more coloring agent into the matte paint throughout the entire piece.
Add Finishing Touches
The final step is to use a 220-grit sanding block to very lightly sand the entire piece. If you wish, you can also use a butter knife or other tool to scrape some areas to add more character. Try to distress areas where a piece of furniture naturally experiences such damage. In our example, we nicked the corners on several drawers for a natural look.