Home Decor

How to Stain Wood Furniture Like a Pro : Follow Step by Step

Wood furniture pieces that have been better can be resuscitated get-togethers sand and color them. Finishing a wood furniture piece can bring back its unique look. Or then again, you can totally change the presence of wood seats, chests, end tables, or tables by applying a decent wood color of an alternate tone and tone.

Before You Begin

Successful furniture staining is all about careful prep work. The piece must completely be sanded down to bare wood to accept the stain. Any remaining paint, stain, or coating will affect the appearance of the furniture when you stain

Safety Considerations

Work in well-ventilated areas when using stains or coatings. Be sure to wear breathing protection. Stain is difficult to remove from skin, so wear latex or latex-substitute gloves when working with stain. Always wear eye protection.

What You’ll Need

Equipment / Tools

  • Oscillating sander
  • Foam sanding block
  • Brush
  • Microfiber staining pads
  • Screwdriver
  • Shop vacuum
  • Microfiber cloth
  • Tack cloth
  • Cloth dropcloth or contractor masking paper
  • Empty 1-quart paint pail
  • Eye and breathing protection
  • Latex gloves

Materials

  • Stain
  • Clear coating
  • Sandpaper

Instructions

  • Prepare Work Area for Sanding
  • Remove Obstructions
  • Sand Furniture
  • Remove Dust
  • Prepare Area for Staining
  • Mix Stain
  • Begin Staining
  • Wipe Excess Stain
  • Let Stain Dry
  • Apply Protective Coating
  1. Prepare Work Area for Sanding

    Choose a ventilated, protected area, such as outside under a patio cover, in a garage with the door open, or in a well-ventilated shop. Avoid windy areas, since wind can deposit dust and other debris on your work. Place plastic sheeting under the wood furniture before sanding it down.

    Large drop cloth under black wooden chair before sanding

  2. Remove Obstructions

    Remove everything from the furniture that will not be sanded, including hinges, knobs, and decorative pieces. Place these items in plastic bags and set them aside.


  3. Sand Furniture

    Carefully sand down the wood furniture. Begin sanding by hand with a sanding block or foam sanding sponge to level down lumpy paint or lacquer. Move to the power sander with fine-grit sandpaper such as #220 for the flat surfaces. Chair spindles can be sanded down by wrapping the sandpaper around the surface and sliding it up and down by hand.

    Wooden chair sanded by hand to remove old finish with sandpaper

  4. Remove Dust

    With the shop vacuum brush attachment and the tack cloth, thoroughly clean the furniture to remove all dust. Test for cleanliness by wiping it down with a clean, white microfiber cloth.

    Warning

    Do not press firmly on the tack cloth. Doing so can embed wax into the wood, necessitating further sanding.

    Lint-free cloth wiping down excess sanding dust from wooden chair

  5. Prepare Area for Staining

    Remove the furniture from the area. Remove the sheet plastic carefully to avoid spreading dust. Replace the plastic sheet with a cloth dropcloth or with contractor masking paper. Elevate the piece on scrap pieces of two-by-four for better access to the bottom of the piece.

    Large paper and plastic sheets under wooden chair

  6. Mix Stain

    Wearing latex gloves, open the can with a paint can opening tool or a screwdriver. With a paint stirring stick or a popsicle-style wood stick, slowly stir the stain to mix it up. Do not shake the can. Pour the stain into the empty 1-quart paint pail.

    Wood stain stirred with thin paint stick while wearing blue gloves

  7. Begin Staining

    Use the microfiber staining pad or brush to stain the wood furniture. To do so, dip part of the pad in the stain and squeeze out the excess. Then, wipe the stain across the wood furniture. Start with the most visible areas, ending with less visible areas.

    Wooden chair flipped over to add black stain first

  8. Wipe Excess Stain

    As you are staining, occasionally go back and wipe off excess stain with a fresh microfiber cloth. Wiping off the excess stain creates a more consistent color and prevents blotchy areas. Don’t progress too far on the piece before coming back to wipe off excess, since excess stain will eventually soak into the piece and create dark spots.

    Lint-free rag removing excess black stain on wooden chair while wearing blue gloves

  9. Let Stain Dry

    Wood stain dries to the touch fairly quickly and you can move the piece within a couple of hours, if needed. Let the piece dry in a warm, dust-free area.

    Wooden chair with fresh black stain sitting out to dry

  10. Apply Protective Coating

    After the wood furniture is fully dry, apply a clear protective coating. Applying water- or oil-based polyurethane spray is a good way to protect the piece, while letting the beauty of the stain show through.

    Spray only in an area free of drafts. Drafts create overspray. Overspray is not visible, but it does result in a rough surface that can be fixed only by a final sanding with fine-grit #320 or #220 sandpaper.

    Final finish spray in white spray can sprayed over black-stained wooden chair

When to Call a Professional

It’s often best to have a professional furniture restorer stain wood furniture with delicate or intricate texturing and designs, as these areas can be difficult to sand. For antique pieces of value, it’s worthwhile to have a professional take on the project rather than attempting to do it by yourself.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close